Large construction site with words
OH&S

What is different in ISO 45001?

Published: May 04, 2016
Large construction site with words
OH&S

In Australia and New Zealand, we have had AS/NZS 4801 since 2001, and in the world of management system standards that is quite a long time. Whilst the British did come up with OHSMS 18001 in 1999, last reviewed in 2007, this has been treated as a more international standard than 4801 however, it is still not an ISO standard. But the wait is nearly over – ISO 45001 is on its way. But it asks the question – what is different in ISO 45001?

A committee draft was already released some time ago, and we now have the DIS (draft international standard). Only the FDIS (final draft international standard) is to come before the final approval and release date.

ISO 45001 is expected to be officially released later in 2016, probably around August/September.

We currently have two standards for Occupational health and safety management systems within Australia and New Zealand.

  • OHSAS 18001:2007 Occupational health and safety management systems – Requirements
  • AS/NZS 4801:2001 Occupational health and safety management systems – Specification with guidance for use.

So what is different in the new ISO 45001? This is by no means a full list word by word, it’s a more general look at some of the new requirements that we find interesting.

  1. ISO 45001 follows 10 clauses of SL9 the ISO High-Level Structure, as does,

It will be easier for integration and alignment with other management system standards.

  1. The incident definition now includes a note that an incident can occur where there is no nonconformity – things can be working as they should and an incident can still happen.
  2. The OH&S management system processes now have to be integrated into the organization’s business processes. This is brilliant and should mean no more separate OHS procedures and instructions – it should just be part of the every day.
  3. Top management now takes overall responsibility and accountability for the protection of workers’ work-related health and safety. Top management in both AS/NZS 4801 and OHSAS 18001 were responsible, but they could delegate the accountability. Now the buck goes all the way to the top before it stops.
  4. The word “systematically” has been included when identifying and taking actions to address work-related hazards and risks, nonconformities, and opportunities. AS/NZS 4801 and OHSAS 18001 previously required methodologies and documented procedures, but ISO 45001 improves on this by requiring these to be systematic.
  5. Targets are no longer required as they used to be in AS/NZS 4801. Interestingly OHSAS 18001 never required them. They are however still mentioned in ISO 45001 in the definition of an objective where it explains that an objective may be called something else e.g. aim, goal or target. Let’s hope some of those silly safety targets now disappear.
  6. The active participation of workers is now required along with the identification and removal of any obstacles or barriers to consultation. Suggested possible obstacles and barriers are mentioned, such as, failure to respond to worker input or suggestions, language or literacy barriers, reprisals, threats of reprisals and policies or practices that discourage or penalize worker participation.
  7. Also, there is additional strength in the participation and inclusion of non-managerial workers. All workers now have to be involved – these are the people that do the work, and they are the people that are most likely to get injured.
  8. “Adapting work to workers” has been included as a way of controlling processes. It is now clearer that “things have always been done like this” is not an acceptable control measure.
  9. Multi-employer workplaces are now included along with the coordination of the (relevant parts of the) OH&S management system with other organizations. This will be very applicable for building and construction sites, where many tradespeople are working, each possibly with a different employer, and a different system of management.
  10. The hierarchy of control is in the requirements of ISO 45001 similar to OHSAS 18001, whereas AS/NZS 4801 have it only in the guidance. Isolation is not included which is a bit disappointing. The hierarchy of control is an important methodology for controlling hazards and whilst quite straightforward rarely seems to be used in practice with most hazards being controlled through signage, documentation and training (administration), and hard hats, safety boots and protective eyewear (PPE).
  11. The management of change is strengthened in ISO 45001 and requires that an organization is aware of any new risks that arise from changes, such as new products, processes, services, changes to plant and equipment, or applicable legal and other requirement changes, to name a few. This should ensure a more structured and thoughtful approach to change management and make people stop and think before they leap into change without thinking of the new risks that the change itself may introduce.
  12. Continual improvement, which is a recurring activity to enhance performance, now explains that continual does not mean continuous. This clarifies that the “recurring activity” does not to take place in all areas simultaneously and go on forever, but that it needs to be tailored to suit different situations, and may stop and start.

Are you looking for OHS Training courses?

Find a course

Back to Blog

“Excellent trainers with high level expertise, varied content to keep us engaged and quality resources leave me with confidence that I could implement what I’ve learned.”

“The presenters really helped to link the course material to real life situations. They were very professional and helped make the course very enjoyable.”

“Thoroughly enjoyable learning experience, facilitated to an excellent standard – Well adapted to the diversity of skill within the group.”

Fantastic course professionally run by a ‘real’ auditor working in the field which allowed for a fantastic bridge between theory and practical examples.

“Very informative and enjoyable course. Excellent materials and tools in the course and to take home. Excellent value for money. The trainer did a great job of keeping us engaged and learning. I will do future training through PwC.”

Need help finding a course?

Speak directly with a member of the Training Academy team to decide which course is right for you.

We are a community of solvers combining human ingenuity, experience and technology innovation to deliver sustained outcomes and build trust.

It all adds up to The New Equation.

See how The New Equation can solve for you

×
Menu